| Item | 
               Wire Color | 
               Polarity | 
               Location | 
               Notes | 
             
| +12V | 
               Yellow | 
               + | 
               Ignition Switch Harness | 
               Fused at 30 Amps | 
             
| +12V | 
               Light Green | 
               + | 
               Ignition Switch Harness | 
               Fused at 50 Amps | 
             
| +12V | 
               Brown | 
               + | 
               Ignition Switch Harness | 
               Fused at 50 Amps | 
             
| Ignition 1 Fuel delivery and ignition systems, transmission controls, analog instrument cluster  | 
               Brown/Pink | 
               + | 
               Ignition Switch Harness | 
               Hot with key in the "run" and "start" positions | 
             
| Ignition 2 Climate control blower motor, blend door, A/C cycle switch  | 
               Gray/Yellow | 
               + | 
               Ignition Switch Harness | 
               Hot with key in the "run" position only.
Not   powered   with key in the "start" position. Use an external relay due to high current draw  | 
             
| Ignition 3 Alternator charge indicator, Airbag Module, Antilock brakes, Digital Instrument Cluster  | 
               Pink/Black | 
               + | 
               Ignition Switch Harness | 
               Hot with key in the "run" position only.
Not   powered   with key in the "start" position. Engine will run without powering this wire, but the alternator will not charge and the antilock brakes will not function properly  | 
             
| Accessory 1 Radio, Power windows, Windshield wipers  | 
               Black/Light Green | 
               + | 
               Ignition Switch Harness | 
               Hot with key in the "run" or "accessory"
positions.     Not powered with key in the "start" position. Do not need to apply power to this wire during remote starting.  | 
             
| Starter | 
               White/Pink | 
               + | 
               Ignition Switch Harness | 
               Hot with the key in the "start" position
only. | 
             
| Power Door Locks (Lock) | 
               Pink/Yellow | 
               Behind Glovebox or in Drivers Door Harness | 
               Vehicles without factory keyless entry such 
 as  police  interceptors are five wire ground at rest reverse polarity. 
      Cars with factory keyless entry are positive trigger (+).  | 
             |
| Power Door Locks (Unlock) | 
               Pink/Light Green | 
               Behind Glovebox or in Drivers Door Harness | 
               Vehicles without factory keyless entry such 
 as  police  interceptors are five wire ground at rest reverse polarity. 
      Cars with factory keyless entry are positive trigger (+).  | 
             |
| Parking Lights | 
               White/Black | 
               + | 
               At LCM or at Headlight Switch | 
               |
| Headlights | 
               Red/Yellow | 
               + | 
               At LCM or at Headlight Switch | 
               |
| Courtesy Lights | 
             Black/Light Blue | 
             + | 
             At LCM | 
             |
| Igntion Key Warning | 
               Black/Pink | 
               - | 
               At LCM | 
               Supplies a ground path to the LCM when the
 ignition    key is in the lock cylinder. Note that cutting this wire will
 not disable    the warning buzzer tone when the key is in the accessory
position  and the    drivers door is opened | 
             
| Door Trigger | 
               Dark Blue & Black/Orange  | 
               - | 
               At LCM or Behind Drivers Kickpanel | 
               Diode isolate the two wires. The blue wire
 is  for   the drivers door, the black/orange for the remaining three passengers 
  doors. | 
             
| Neutral Safety | 
               Park neutral switch is located on the transmission 
    and electrically opens the starter circuit unless the gear selector is 
 in   park or neutral | 
             |||
| Horn | 
               Dark Blue | 
               - | 
               At base of steering column or at lcm | 
               Grounding this wire sounds the horn | 
             
| Trunk Ajar | 
               Brown/White | 
               - | 
               At LCM | 
               Provides a ground path when the trunk is
ajar | 
             
| Trunk Release Solenoid | 
               Purple/Yellow | 
               + | 
               Behind drivers kickpanel or in bundle of
wires    above  drivers rocker panel | 
               On vehicles equipped with the factory keyless 
 entry system, the trunk release actuator lead rests at ground, so an spdt 
 relay must be used. | 
             
| Reverse Lights | 
               Black/Pink | 
               + | 
               Behind drivers kickpanel or in bundle of
wires    above  drivers rocker panel | 
               |
| Tachometer | 
               At COP assembly or at PCM | 
               There is no true tachometer source on 98'-02' 
  crown   victorias. But using one of the coil on plug ignition coils signal 
  wires  will be acceptable for most recent remote starters. There are two 
 wires on  each coil, one is a constant +12V source Red/Light Green, the other
 is the  pulsed ground signal wire. If a true tachometer source is needed, an aftermarket "tach adapter" can be installed.  | 
             ||
| Brake Light Switch | 
               Light Green | 
               + | 
               At brake light switch or behind drivers kickpanel 
    or in bundle of wires above drivers rocker panel | 
               |
| Rear Window Defroster Switch | 
               Dark Blue/Orange | 
               - | 
               At defroster switch or LCM | 
               Supply a momentary ground pulse to engage 
the   rear   window defroster.  | 
             
| Rear Window Defroster Element Feed | 
               Brown/Light Blue | 
               + | 
               At LCM or in bundle of wires above passengers 
  rocker   panel | 
               Supply a continuous +12V to this wire to
engage    the  rear window defroster. Bypasses the LCM timer all together
and supplies    +12V  directly to the defroster elements. |